 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com CBM2080/CBM1180/CBM1183/CBM2075 Datasheet Chipsbank Microelectronics Co., Ltd. West 8 Floor, IER Building, South Area, High-tech Industrial Park, Shenzhen, P.R. China, 518057 Tel: 086-0755-86110580 Fax: 086-0755-86110570 Email: info@chipsbank.com URL: http://www.chipsbank.com contained herein. Copyright by Chipsbank Microelectronics Co., Ltd all rights reserved. DataSheet 4 U .com www..com Contents 1 2 3 4 DESCRIPTION ........................................................................................................................................ 1 FEATURES .............................................................................................................................................. 1 BLOCK DIAGRAM ................................................................................................................................. 3 PIN ASSIGNMENT ................................................................................................................................. 4 4.1 TQFP48 (TOP SIDE) .............................................................................................................................. 4 4.2 CBM2080L/CBM1180L LQFP64 (TOP SIDE).................................................................................... 5 5 6 PIN DESCRIPTION................................................................................................................................. 6 ELECTRICAL CHARACTERISTICS ................................................................................................... 9 6.1 ABSOLUTE MAXIMUM RATINGS ...................................................................................................... 9 6.2 RECOMMENDED OPERATING CONDITIONS ................................................................................. 9 6.3 STATIC CHARACTERISTICS............................................................................................................... 9 6.4 DYNAMIC CHARACTERISTICS ........................................................................................................ 10 7 8 TYPICAL APPLICATION ..................................................................................................................... 12 MECHANICAL DIMENSIONS............................................................................................................. 13 8.1 48-PIN CBM2080/CBM1180 PACKAGE OUTLINE DIMENSION................................................. 13 8.2 64-PIN CBM2080L/CBM1180L MODE PACKAGE OUTLINE DIMENSION............................... 14 9 COPYRIGHT NOTICE.......................................................................................................................... 15 i CBM2080/CBM1180 Datasheet -i - March 22, 2005 DataSheet 4 U .com www..com 1 Description Fastest & Securest USB 2.0/USB1.1 Flash Disk Controller with dedicated 32-bit microprocessor The CBM2080 is the fastest, securest USB 2.0 Flash Disk controller on the market. With dual-channel mode enabled, CBM2080 can reach theoretical flash access speed limit of 22MByte/s for read and 20MByte/s for write. For CBM1180/CBM1183, it can reach 1.0Mbytes/s write and 1.1Mbytes/s read. The on-the-fly ECC engine is capable of correcting up to 3bytes (24bits), detect 4 or more bytes errors per 528bytes page . For data security, CBM2080/CBM1180/CBM1183 are designed with both hardware and software data protection technology to prevent data corruption even if it is powered off or unplugged during data transfer. The CBM2080/CBM1180 supports all NAND/MLC/AG-AND flash memory available in the market,and the CBM1183 supports all NAND/MLC flash memory available in the market. New flash can be supported by software re-configuration. The CBM2080/CBM1180/CBM1183 runs smoothly with all available hosts and PC platforms. Complied with USB specification rev. 2.0, the CBM2080/CBM1180 can be supported without additional driver under Win XP, Win 2000, Windows Me, Mac OS and Linux OS. With device driver installed, it can support Win 98/98SE as well. Comprehensive applications, such as PC boot up, disk partitions, password check for security disk, are available as part of our mass production software package. The USB2.0 flash disk controller CBM2080 is Pin to pin compatible with USB1.1 flash disk controller CBM1180/CBM1183, This enables the manufacturers to have the exactly same BOM and PCB layout for both USB1.1 and USB2.0 flash disk product. The CBM2080/CBM1180/CBM1183 are available in 48-pin TQFP and 64-pin LQFP package, which are thinnest and smallest on the market. The 48-pin CBM2080/CBM1180 CBM1183 supports up to 4 flash chips and the 64-pin CBM2080L/CBM1180L CBM1183L supports up to 8 flash chips. Customers can choose different packages to meet their design requirement. The CBM2075 is a cost-effective general purpose USB2.0 device controller with embedded 32-bit microprocessor. With 16 GPIO ports, it is available in 48-pin TQFP package. 2 Features USB Interface High-speed USB 2.0 interface; backward compatible with USB 1.1 Integrated USB 2.0/USB1.1 PHY and controller Fastest data transfer rate on the market CBM2080: Dual-channel mode: 22MB/s for Read, 20MB/s for Write Single-channel mode: 11MB/s for Read, 10MB/s for Write CBM1180 CBM1183: 1.1MB/s for Read, 1.0MB/s for Write (No difference between Dual and single channel mode) On-the-fly ECC built-in Hardware enhances reliability ECC for Binary NAND flash: ECC for MLC NAND flash: 3-24 bit/page (1 page = 528 bytes) 6-24 bit/page 1 CBM2080/CBM1180 Datasheet -1 - March 22, 2005 DataSheet 4 U .com www..com ECC for AG-AND flash: 6-24 bit/page Hardware & Software Data Protection Technology Prevent data corruption even if it is powered off or unplugged during data transfer. NAND, AG-AND & MLC Flash Interface Supports Samsung & Toshiba NAND flash memories Supports Toshiba & Sandisk MLC flash memories Supports Renesas AG-AND flash memories Supports Infenion / Hynix flash memories Supports ST Microelectronics flash memories Supports Micron / Actrans flash memories Software configuration to support various new flash memories Supports up to 8 flash chips. Proprietary 32-bit CISC microprocessor feature Proprietary 32-bit CISC processor for USB protocol processing and flash access. Single cycle instruction period Write-protect switch for security Integrated 3.3v to 1.8v voltage regulator LED indicator to show access status Three modes: Busy, waiting, and off Disk partitions and password check for security disk available PC boot up as USB Zip Disk and USB Hard Disk Auto run function USB suspend and resume Low power dissipation Operating current 50mA (Bus power compatible) Leading 0.18um CMOS technology 48-pin TQFP /64-pin LQFP package 48-pin CBM2080/CBM1180/CBM1183 supports up to 4 Flash Chips 64-pin CBM2080L/CBM1180L/CBM1183L supports up to 8 Flash Chips Windows, Mac and Linux compatible 2 CBM2080/CBM1180 Datasheet -2 - March 22, 2005 DataSheet 4 U .com www..com 3 Block Diagram 3 CBM2080/CBM1180 Datasheet -3 - March 22, 2005 DataSheet 4 U .com www..com 4 Pin Assignment 4.1 TQFP48 (Top Side) 4 CBM2080/CBM1180 Datasheet -4 - March 22, 2005 DataSheet 4 U .com www..com 4.2 LQFP64 (Top Side) 5 CBM2080/CBM1180 Datasheet -5 - March 22, 2005 DataSheet 4 U .com www..com 5 Pin Description Brief CBM2080/CBM1180/CBM1183 pin functions are shown in the following tables. I: O: I/O : PWR : GND : Input signal Output signal Bi-direction signal Power signal Ground signal CBM2080 & CBM1180 & CBM2075 LQFP64 / TQFP48 Pin Description CBMxx80L LQFP64 Pin No. 63 64 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CBMxx80/ CBM2075 TQFP48 Pin No. 1 -- -- -- 2 3 4 -- 5 6 7 -- 8 -- 9 10 Pin Name FDATA0_7 GPIO7 TXD RXD FCEN4 VSS VDD33 DM nc DP RREF VD33A VD33A VS33A VS33A VSSA XI I/O I PWR PWR GND GND GND I USB Data Positive Pin Connect External reference Analog 3.3V Power Analog 3.3V Power Analog 3.3V Ground Analog 3.3V Ground Analog 1.8V Ground Crystal Input (12 MHz) Resister for current Type I/O O I O GND PWR I/O Description Group 0 Flash Data Bus - bit 7 General I/O port 7 Serial port data out Serial port data in Flash Chip Enable - Chip 4 (active low) Padring 3.3V / Logic 1.8V Ground Padring 3.3V Power USB Data Negative Pin 6 CBM2080/CBM1180 Datasheet -6 - March 22, 2005 DataSheet 4 U .com www..com 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 11 12 -- -- 13 14 15 16 17 18 19 20 21 22 23 24 -- -- -- 25 26 -- 27 28 29 30 XO VDDA GPI0 GPI1 WP RESET_ FWRN1 FRDN1 LED FRB1 GPI5 TEST_MODE BT_SEL FDATA1_0 GPIO8 FDATA1_1 GPIO9 FDATA1_2 GPIO10 FDATA1_3 GPIO11 GPI2 GPI3 FCEN5 FDATA1_4 GPIO12 FDATA1_5 GPIO13 FCEN3 VDD33 FDATA1_6 GPIO14 FDATA1_7 GPIO15 FALE1 GPO3 O PWR I/O I/O I I O O O I I I I/O I/O I/O I/O I/O I/O O I/O I/O O PWR I/O I/O O Crystal Output Analog 1.8V Power General Input port 0 General Input port 1 Write Protect Switch Input Reset Sign (active low) Group 1 Flash Write Enable (active low) Group 1 Flash Read Enable (active low) LED Indication Group 1 Flash Ready_Busy General Input port 5 Test Mode Enable Pin Boot up selection Group 1 Flash Data Bus - bit 0 General I/O port 8 Group 1 Flash Data Bus - bit 1 General I/O port 9 Group 1 Flash Data Bus - bit 2 General I/O port 10 Group 1 Flash Data Bus - bit 3 General I/O port 11 General Input port 2 General Input port 3 Flash Chip Enable - Chip 5(active low) Group 1 Flash Data Bus - bit 4 General I/O port 12 Group 1 Flash Data Bus - bit 5 General I/O port 13 Flash Chip Enable - Chip 3 (active low) Padring 3.3V Power Group 1 Flash Data Bus - bit 6 General I/O port 14 Group 1 Flash Data Bus - bit 7 General I/O port 15 Group 1 Flash Address Latch Enable General Output port 3 7 CBM2080/CBM1180 Datasheet -7 - March 22, 2005 DataSheet 4 U .com www..com 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 31 -- 32 -- 33 34 35 36 -- 37 38 39 40 41 42 43 44 45 -- 46 47 48 FCLE1 GPO4 FCEN6 FRB0 GPI4 FCEN2 FCLE0 GPO0 FALE0 GPO1 VSS FCEN0 FCEN1 FWRN0 FRDN0 FDATA0_0 GPIO0 FDATA0_1 GPIO1 FDATA0_2 GPIO2 FDATA0_3 GPIO3 VSS33R VREF18 VDD33R FCEN7 FDATA0_4 GPIO4 FDATA0_5 GPIO5 FDATA0_6 GPIO6 O O I O O O GND O O O O I/O I/O I/O I/O GND PWR PWR O I/O I/O I/O Group 1 Flash Command Latch Enable General Output port 4 Flash Chip Enable - Chip 6 (active low) Group 0 Flash Ready_Busy General Input port 4 Flash Chip Enable - Chip 2 (active low) Group 0 Flash Command Latch Enable General Output port 0 Group 0 Flash Address Latch Enable General Output port 1 Padring 3.3V / Logic 1.8V Ground Flash Chip Enable - Chip 0 (active low) Flash Chip Enable - Chip 1 (active low) Group 0 Flash Write Enable (active low) Group 0 Flash Read Enable (active low) Group 0 Flash Data Bus - bit 0 General I/O port 0 Group 0 Flash Data Bus - bit 1 General I/O port 1 Group 0 Flash Data Bus - bit 2 General I/O port 2 Group 0 Flash Data Bus - bit 3 General I/O port 3 Regulator 3.3V Ground Regulator 1.8V Out Regulator 3.3V Power Flash Chip Enable - Chip 7 (active low) Group 0 Flash Data Bus - bit 4 General I/O port 4 Group 0 Flash Data Bus - bit 5 General I/O port 5 Group 0 Flash Data Bus - bit 6 General I/O port 6 8 CBM2080/CBM1180 Datasheet -8 - March 22, 2005 DataSheet 4 U .com www..com 6 Electrical Characteristics 6.1 Absolute maximum ratings In accordance with the Absolute Maximum Rating System (IEC 60134). symbol VCCA VCCD VI Vesd Tstg parameter analog supply voltage digital supply voltage input voltage electrostatic discharge voltage[1] storage temperature ILI < 1A DP, DM and GND pins other pins conditions min -0.5 -0.5 -0.5 -4000 -2000 -40 max 5.5 4.5 5.5 +4000 v +2000 +125 unit v v v [1] Equivalent to discharging a 100 pF capacitor via a 1.5 kresistor (Human Body Model). 6.2 Recommended operating conditions symbol VCCA VCCD VI VI(AI/O) Tamb Parameter analog supply voltage digital supply voltage input voltage input voltage on analog I/O pins DP DM ambient temperature Low/Full speed High speed conditions min 3.0 3.0 0 0 0 0 Typ 3.3 3.3 3.3 400 max 3.6 3.6 VCCD 3.6 +70 Unit V V V V mV 6.3 Static characteristics All parameters are measured at VCCA = VCCD = 3.0 to 3.6 V; VAGND = VDGND = 0 V; Tamb = 40 to 85 ; symbol Parameter Conditions min Typ max Unit operating supply current suspend supply current Full-speed transmitting and receiving; high-speed transmitting and receiving in suspend mode 29.5 50 500 uA 9 mA ICC ICC(susp) CBM2080/CBM1180 Datasheet -9 - March 22, 2005 DataSheet 4 U .com www..com 6.4 Dynamic characteristics All parameters are measured at VCCA = VCCD = 3.0 to 3.6 V; VAGND = VDGND = 0 V; Tamb = 40 to 85 ; symbol Ts(FDATA*) Th(FDATA*) Ts (FCLE*) Th (FCLE*) Ts (FALE*) Th (FALE*) Ts (FCEN*) Tpw (FWRN*) Thh (FWRN*) Ta(FDATA*) Tpw (FRDN*) Thh (FRDN*) Parameter FDATA* setup time relative to rising FWRN* edge FDATA* hold time relative to falling FWRN* edge FCLE* setup time relative to falling FWRN* edge FCLE* hold time relative to rising FWRN* edge FALE* setup time relative to falling FWRN* edge FALE* hold time relative to rising FWRN* edge FCEN* setup time relative to falling FWRN* edge FWRN* Pulse Width FWRN* high hold time FDATA* access time relative to falling FRDN* edge FWRN* Pulse Width FWRN* high hold time conditions min Typ 33 33 33 33 33 33 99 33 33 33 33 max 40 Unit ns ns ns ns ns ns ns ns ns ns ns ns Timing diagram for Writing of Data Timing diagram for Reading of Data 10 CBM2080/CBM1180 Datasheet -10 - March 22, 2005 DataSheet 4 U .com www..com 11 CBM2080/CBM1180 Datasheet -11 - March 22, 2005 DataSheet 4 U .com DataSheet 4 U .com www..com 7 Typical Application CBM2080/CBM1180 Datasheet --12 -- March 22, 2005 www..com 8 Mechanical Dimensions 8.1 48-Pin CBM2080/CBM1180/CBM1183 Package Outline Dimension 13 CBM2080/1180 Datasheet - 13 - March 22, 2005 DataSheet 4 U .com www..com 8.2 64-Pin CBM2080L/CBM1180L/CBM1183L Mode Package Outline Dimension 14 CBM2080/1180 Datasheet - 14 - March 22, 2005 DataSheet 4 U .com www..com 9 Copyright Notice Copyright 2004 by Chipsbank Microelectronics Co. Ltd. All Rights Reserved. Right to make changes --Chipsbank Microelectronics Co., Ltd reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. The information contained in this manual is provided for the general use by our customers. Our customers should be aware that the personal computer field is the subject of many patents. Our customers should ensure that they take appropriate action so that their use of our products does not infringe upon any patents. It is the policy of Chipsbank Microelectronics Co., Ltd. to respect the valid patent rights of third parties and not to infringe upon or assist others to infringe upon such rights. This manual is copyrighted by Chipsbank Microelectronics Co., Ltd. You may not reproduce, transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, any part of this publication without the expressly written permission from Chipsbank Microelectronics Co., Ltd. CBM2080/CBM1180 Datasheet - 15 - March 22, 2005 DataSheet 4 U .com |
Price & Availability of CBM2075
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |